Can the Round nozzle for coolant, 3/4" system, LOC-LINEÂ® handle continuous operation at 1.4 bar and +76Â°C?

Yes. Round nozzle for coolant, 3/4" system, LOC-LINEÂ® is specified for a working pressure up to 1.4 bar and an operating temperature up to +76Â°C, so it is rated to handle continuous operation at those exact conditions. Ensure the rest of your system (hose, fittings, seals) also meets these limits and consider any temperature or pressure spikes, chemical compatibility, and mounting stresses that could reduce service life.

Is the Round nozzle for coolant, 3/4" system, LOC-LINEÂ® compatible with 5/8" hoses or adapters?

Round nozzle for coolant, 3/4" system, LOC-LINEÂ® is designed for the 3/4" LOC-LINEÂ® system but the product description notes availability in sizes 3/4" and 5/8". That means there is a version compatible with 5/8" hoses/adapters. Ensure you select the 5/8" size if your hoses/adapters are 5/8" to guarantee proper fit and sealing; the material (acetal) and working pressure (up to 1.4 bar) are the same for both sizes.

Does the Round nozzle for coolant, 3/4" system, LOC-LINEÂ® resist common coolant chemicals and oils?

Yes. Round nozzle for coolant, 3/4" system, LOC-LINEÂ® is made of acetal (POM), a thermoplastic noted for good chemical resistance to many common coolants, oils and lubricants used in machining. Within its stated operating limits (working pressure up to 1.4 bar and temperature up to +76Â°C), acetal resists water-based soluble coolants, neat cutting oils, and most petroleum-based oils encountered in routine coolant delivery. However, acetal can be attacked by strong acids, strong bases, and some aggressive solvents (chlorinated hydrocarbons, ketones, and certain aromatic solvents). Prolonged exposure to such aggressive chemicals, or operation above the specified temperature or pressure limits, can reduce service life and lead to swelling, crazing or embrittlement. In short: Round nozzle for coolant, 3/4" system, LOC-LINEÂ® will resist typical coolants and machining oils under normal conditions, but avoid prolonged contact with strong acids, alkalis and aggressive solvents and keep within the specified temperature/pressure limits for reliable performance.

Ugello rotondo per refrigerante, sistema 3/4″, LOC-LINE®

Tubi per aria e acqua, Tutti i prodotti/

Additional information

Ugello rotondo per tubi flessibili per refrigerante LOC-LINE® – sistema 3/4″. Disponibile nelle misure 3/4″ e 5/8″. Materiale: acetalica. Pressione di esercizio: fino a 1,4 bar. Temperatura di esercizio: fino a +76°C.

Elenco delle varianti di prodotto

Codice articolo	Nome variante prodotto	DN	BAR	Disponibilità	Prezzo	Quantità	Azioni	Catalogo
LL-69542	Ugello rotondo 3/4" (sistema 3/4")	-	1.4	In stock	0 zł		Richiesta
LL-69543	Ugello circolare 5/8" (sistema 3/4")	-	1.4	In stock	0 zł		Richiesta

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Ugello rotondo per tubi flessibili per refrigerante LOC-LINE® – sistema 3/4″. Disponibile nelle misure 3/4″ e 5/8″. Materiale: acetalica. Pressione di esercizio: fino a 1,4 bar. Temperatura di esercizio: fino a +76°C.