Is the Narrow-bore flat nozzle for coolant, 1/2" system, LOC-LINEÂ® suitable for use at pressures up to 2 bar and temperatures up to +76Â°C?

Yes. Narrow-bore flat nozzle for coolant, 1/2" system, LOC-LINEÂ® is suitable for use at pressures up to 2 bar and temperatures up to +76Â°C. The product description specifies a working pressure up to 2 bar and an operating temperature up to +76Â°C, and it is made of acetal.

Can the Narrow-bore flat nozzle for coolant, 1/2" system, LOC-LINEÂ® be used with 3.2 mm or 2 mm holes (5 or 7) for acetal coolant lines?

Yes. The Narrow-bore flat nozzle for coolant, 1/2" system, LOC-LINEÂ® with either Ã 3.2 mm (5 holes) or Ã 2 mm (7 holes) is designed for acetal coolant lines and can be used accordingly. It is compatible with the 1/2" LOC-LINEÂ® system, made of acetal, rated for working pressure up to 2 bar and operating temperatures up to +76Â°C, so ensure your coolant pressure and temperature stay within these limits for safe, reliable operation.

Does the Narrow-bore flat nozzle for coolant, 1/2" system, LOC-LINEÂ® resist chemical coolants when made of acetal?

Narrow-bore flat nozzle for coolant, 1/2" system, LOC-LINEÂ® made of acetal offers good general chemical resistance but has limitations. Acetal (POM) is resistant to many hydrocarbons, mineral oils, and some coolants, so typical water-based and many oil-based metalworking coolants used at ambient to moderate temperatures will generally be compatible. However, acetal can be attacked or degraded by strong acids, strong bases, certain chlorinated hydrocarbons, ketones (e.g., acetone), and some aggressive solvents. The specified operating conditions. working pressure up to 2 bar and temperature up to +76Â°C. are within normal ranges for acetal, but chemical compatibility depends primarily on the exact coolant formulation and additives (corrosion inhibitors, biocides, solvents). Recommendation: verify the specific coolantâs chemical compatibility with acetal (POM) before use. If the coolant contains aggressive solvents, strong alkalies/acids, or proprietary additives of unknown composition, consult the coolant manufacturer or perform material compatibility testing. For common water-based and many oil-based machining coolants, the Narrow-bore flat nozzle for coolant, 1/2" system, LOC-LINEÂ® in acetal will usually be suitable.

Ugello piatto a foro stretto per liquido refrigerante, sistema 1/2″, LOC-LINE®

Tubi per aria e acqua, Tutti i prodotti/

Additional information

Ugello piatto stretto con fori (5 o 7 fori) di diametro Ø 3,2 mm o Ø 2 mm per tubi flessibili di raffreddamento LOC-LINE® – sistema 1/2″. Materiale: acetalica. Pressione di esercizio: fino a 2 bar. Temperatura di esercizio: fino a +76°C.

Elenco delle varianti di prodotto

Codice articolo	Nome variante prodotto	DN	BAR	Disponibilità	Prezzo	Quantità	Azioni	Catalogo
LL-59892	Ugello piatto con fori 5x3,2 mm (sistema 1/2")	-	2	In stock	0 zł		Richiesta
LL-59893	Ugello piatto con fori 7x2 mm (sistema 1/2")	-	2	In stock	0 zł		Richiesta

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Ugello piatto stretto con fori (5 o 7 fori) di diametro Ø 3,2 mm o Ø 2 mm per tubi flessibili di raffreddamento LOC-LINE® – sistema 1/2″. Materiale: acetalica. Pressione di esercizio: fino a 2 bar. Temperatura di esercizio: fino a +76°C.