Is the Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® suitable for continuous use at working pressure up to 3 bar and temperatures up to +76Â°C?

Yes. The Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® is specified for working pressures up to 3 bar and operating temperatures up to +76Â°C, so it is suitable for continuous use within those limits. The nozzle is made of acetal, a material commonly used in fluid-handling components for its dimensional stability and chemical resistance at such pressures and temperatures. Ensure the system does not exceed 3 bar or +76Â°C and verify compatibility with the specific coolant used; prolonged exposure to aggressive chemicals or temperatures near the upper limit can reduce service life.

Can the Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® be used with fluids incompatible with acetal material?

Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® is made of acetal and rated for working pressure up to 3 bar and temperatures up to +76Â°C. If a fluid is chemically incompatible with acetal, DO NOT use this nozzle with that fluid. Acetal (POM) can be attacked or degraded by certain solvents, strong acids, bases, and some fuels; exposure may cause swelling, cracking, loss of strength or seal failure. For incompatible fluids, select a nozzle made from a chemically resistant material (e.g., PTFE, polypropylene, stainless steel) or consult the fluid and material compatibility data before use to ensure safe operation.

Does the Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® require special fittings for installation on existing coolant lines?

No. the Flat wide nozzle for coolant, 1/4" system, LOC-LINEÂ® does not require special fittings for installation on existing coolant lines provided those lines are compatible with the LOC-LINEÂ® 1/4" system. The nozzle is designed for the LOC-LINEÂ® modular 1/4" system (material: acetal), so it connects directly to standard LOC-LINEÂ® 1/4" fittings, hoses, and connectors. If your existing coolant lines already use LOC-LINEÂ® 1/4" components, installation is straightforward with push-fit assembly and no additional adapters. However, if your current coolant plumbing uses a different brand, size, or non-modular quick-connect system, you may need a standard adapter or an appropriate fitting to transition from your existing line to the LOC-LINEÂ® 1/4" interface. Also consider working pressure (up to 3 bar) and operating temperature (up to +76Â°C) to ensure compatibility and safe operation.

Ugello piatto largo per liquido refrigerante, sistema 1/4″, LOC-LINE®

Tubi per aria e acqua, Tutti i prodotti/

Additional information

Ugello piatto largo per liquido refrigerante LOC-LINE® – sistema 1/4″. Disponibile nella misura 1″. Materiale: acetalica. Pressione di esercizio: fino a 3 bar. Temperatura di esercizio: fino a +76°C.

Elenco delle varianti di prodotto

Codice articolo	Nome variante prodotto	DN	BAR	Disponibilità	Prezzo	Quantità	Azioni	Catalogo
LL-49427	Ugello piatto con fessura 24x1,5 mm (sistema 1/4")	-	3	In stock	0 zł		Richiesta

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Ugello piatto largo per liquido refrigerante LOC-LINE® – sistema 1/4″. Disponibile nella misura 1″. Materiale: acetalica. Pressione di esercizio: fino a 3 bar. Temperatura di esercizio: fino a +76°C.