Is the Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® compatible with pressures above 2 bar or temperatures exceeding +76Â°C?

No. The Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® is specified for a maximum working pressure of up to 2 bar and an operating temperature up to +76Â°C. Using it above 2 bar or at temperatures exceeding +76Â°C would exceed the productâs rated limits and may lead to failure, leaks, or safety hazards. If your application requires higher pressure or temperature resistance, choose a nozzle rated for those conditions or contact the manufacturer for a suitable alternative.

Can the Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® be used with fluids incompatible with acetal material?

Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® is made of acetal. If a fluid is chemically incompatible with acetal, this nozzle should not be used with that fluid because acetal can degrade, swell, crack or lose mechanical properties when exposed to incompatible solvents, strong acids, bases or certain hydrocarbons. Additionally, operating conditions (up to 2 bar and +76Â°C) do not protect against chemical attack. Before use, consult the fluidâs chemical compatibility with acetal or choose a nozzle made from a resistant material.

Does the Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® come in any sizes other than 1.1/4" and 2.1/2"?

No. Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® Format is only available in the two sizes listed: 1.1/4" and 2.1/2". The product description specifies availability in sizes 1.1/4" and 2.1/2" (material: acetal; working pressure up to 2 bar; operating temperature up to +76Â°C), so no other sizes are indicated.

Ugello piatto largo per liquido refrigerante, sistema 1/2″, LOC-LINE®

Tubi per aria e acqua, Tutti i prodotti/

Additional information

Ugello piatto largo per liquido refrigerante LOC-LINE® – sistema 1/2″. Disponibile nelle misure 1.1/4″ e 2.1/2″. Materiale: acetalica. Pressione di esercizio: fino a 2 bar. Temperatura di esercizio: fino a +76°C.

Elenco delle varianti di prodotto

Codice articolo	Nome variante prodotto	DN	BAR	Disponibilità	Prezzo	Quantità	Azioni	Catalogo
LL-59867	Ugello piatto con fessura 32x4,2 mm (sistema 1/2")	-	2	In stock	0 zł		Richiesta

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Ugello piatto largo per liquido refrigerante LOC-LINE® – sistema 1/2″. Disponibile nelle misure 1.1/4″ e 2.1/2″. Materiale: acetalica. Pressione di esercizio: fino a 2 bar. Temperatura di esercizio: fino a +76°C.