Is the 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® safe for continuous use at up to 2 bar and +76Â°C?

Yes. The 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® is specified for a working pressure up to 2 bar and an operating temperature up to +76Â°C, so it is rated as safe for continuous use at those exact conditions. Ensure that actual system pressure and fluid temperature do not exceed these limits, and inspect the acetal nozzle regularly for wear, chemical compatibility with the coolant, and any signs of deformation or cracking that could reduce safety.

Can the 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® be used with fluids other than water at up to 2 bar and +76Â°C?

Yes - the 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® is specified for working pressure up to 2 bar and operating temperature up to +76Â°C. It is made of acetal, which is chemically resistant to many common cutting fluids, coolants and light oils used in machining. However, compatibility depends on the specific fluidâs chemistry (solvents, strong acids/alkalis, chlorinated hydrocarbons or aggressive ketones can attack acetal). Before using fluids other than water, verify the fluidâs chemical compatibility with acetal and ensure temperature and pressure remain within the stated limits. If in doubt, consult the fluid manufacturer or test the nozzle with the intended fluid under actual conditions.

Does the 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® require special mounting for acetal at 2 bar and +76Â°C?

No special mounting is required for the 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® when used at the specified conditions (2 bar and +76Â°C). The product description lists material as acetal, working pressure up to 2 bar, and operating temperature up to +76Â°C, so normal installation compatible with LOC-LINEÂ® coolant hoses and the 1/2" system is sufficient. Ensure connections are secure and compatible with LOC-LINEÂ® fittings; verify seals and hose condition routinely, but no additional special mounting or reinforcement is necessary within these limits.

Ugello piatto a 90° con fori per liquido refrigerante, sistema 1/2″, LOC-LINE®

Tubi per aria e acqua, Tutti i prodotti/

Additional information

Ugello piatto a 90° con fori per tubi flessibili refrigeranti LOC-LINE® – sistema 1/2″. 8 fori con diametro di 4,3 mm. Materiale: acetalica. Pressione di esercizio: fino a 2 bar. Temperatura di esercizio: fino a +76°C.

Elenco delle varianti di prodotto

Codice articolo	Nome variante prodotto	DN	BAR	Disponibilità	Prezzo	Quantità	Azioni	Catalogo
LL-59881	Ugello piatto a 90Â° con fori 8x4,3 mm (sistema 1/2")	-	2	In stock	0 zł		Richiesta

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Ugello piatto a 90° con fori per tubi flessibili refrigeranti LOC-LINE® – sistema 1/2″. 8 fori con diametro di 4,3 mm. Materiale: acetalica. Pressione di esercizio: fino a 2 bar. Temperatura di esercizio: fino a +76°C.