Is Thread sealant AN30-271, tube suitable for applications exposed to temperatures below -60Â°C or above +150Â°C?

Yes. Thread sealant AN30-271, tube is specified for an operating temperature range of -60Â°C to +150Â°C, so it is suitable for applications exposed to temperatures at or above -60Â°C and at or below +150Â°C.

Can Thread sealant AN30-271, tube be used on threads larger than M20 or in applications requiring frequent disassembly?

Thread sealant AN30-271, tube should not be used on threads larger than M20 - its maximum recommended thread size is M20. It is also not suitable for applications requiring frequent disassembly: the product provides very high strength and is described as difficult to disassemble, so it is intended for permanent or long-term fixation rather than repeated removal and reassembly.

Does Thread sealant AN30-271, tube resist chemicals and oils commonly found in industrial environments?

Thread sealant AN30-271, tube is an anaerobic, medium-viscosity, very high-strength product designed to secure screws and lock pins; it resists loosening and creates a difficult-to-disassemble bond. The supplied specifications (maximum thread size M20, operating temperature â60 Â°C to +150 Â°C, 50 ml tube) do not explicitly state chemical- or oil-resistance. However, typical anaerobic thread sealants with similar formulation and high-strength properties generally offer good resistance to common industrial oils, greases, hydraulic fluids and many solvents once fully cured. They can still be attacked by strong acids, strong bases, certain chlorinated solvents, and some aggressive chemicals, and their performance may degrade with prolonged exposure or high concentrations of specific chemicals. Conclusion: Thread sealant AN30-271, tube is likely resistant to many common industrial oils and typical lubricants after curing, but it may not withstand all aggressive chemicals. For critical chemical compatibility, consult the manufacturerâs technical data sheet or provide the exact chemicals for a definitive compatibility check.

Sigillante per filetti AN30-271, tubo

Guarnizioni e sigillanti per filetti, Tutti i prodotti/

Additional information

Sigillante anaerobico per il bloccaggio di viti contro l’allentamento e per il fissaggio di perni. Presenta viscosità media e resistenza molto elevata. Difficile da smontare. Dimensione massima filetto: M20. Temperatura di esercizio: da -60°C a +150°C. Confezione tipo “tubo” da 50 ml.

Elenco delle varianti di prodotto

Codice articolo	Nome variante prodotto	DN	BAR	Disponibilità	Prezzo	Quantità	Azioni	Catalogo
WE-AN30-271-T-050	Sigillante AN30271 - tubetto da 50 ml	-	-	In stock	0 zł		Richiesta

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Sigillante anaerobico per il bloccaggio di viti contro l’allentamento e per il fissaggio di perni. Presenta viscosità media e resistenza molto elevata. Difficile da smontare. Dimensione massima filetto: M20. Temperatura di esercizio: da -60°C a +150°C. Confezione tipo “tubo” da 50 ml.