Is the Sandblasting gun with 0.7 l. plastic tank, 390 series suitable for use with mineral abrasive grain sizes 0.1â0.8 mm at operating pressures of 4â7 bar?

Yes. The Sandblasting gun with 0.7 l. plastic tank, 390 series is suitable for use with mineral abrasive grain sizes 0.1â0.8 mm at operating pressures of 4â7 bar. The product spec explicitly lists a grain diameter range of 0.1 Ã· 0.8 mm and an operating pressure range of 4 Ã· 7 bar (maximum pressure 8 bar), so the described abrasive size and pressure fall within the deviceâs intended parameters.

Can the Sandblasting gun with 0.7 l. plastic tank, 390 series be used safely at temperatures from 0Â°C to +50Â°C?

Yes. The Sandblasting gun with 0.7 l. plastic tank, 390 series is specified for an operating temperature range from 0Â°C to +50Â°C, so it can be used safely within that temperature range when operated at recommended pressures (4â7 bar, max 8 bar) and with appropriate abrasive (grain 0.1â0.8 mm).

Does the Sandblasting gun with 0.7 l. plastic tank, 390 series perform effectively on rust and solid contaminants in hard-to-reach areas?

Yes. The Sandblasting gun with 0.7 l. plastic tank, 390 series is designed specifically for rust and solid contaminant removal in hard-to-reach areas and, based on its specifications, will perform effectively when used correctly. Key reasons: - Abrasive compatibility: It accepts mineral abrasive grains from 0.1 to 0.8 mm, a suitable range for removing rust and stubborn deposits while allowing selection of the appropriate grit for the surface and degree of contamination. - Nozzle and pressure: The 4 mm nozzle combined with an operating pressure range of 4â7 bar (max 8 bar) provides strong, focused abrasive flow ideal for precision cleaning in tight spots. - Portability and access: The compact 0.7 l plastic tank makes the tool maneuverable for confined or awkward areas where larger units cannot reach. - Operating conditions: Rated for 0Â°C to +50Â°C, it will work across common workshop and field environments. Limitations to consider: - For very heavy, thick corrosion or large-scale stripping, coarser abrasives, higher flow rates, or a larger industrial blaster may be more efficient. - Plastic tank durability: Plastic is lightweight but less impact-resistant than metal tanks; handle with care when working in rugged conditions. - Proper abrasive selection and adequate pressure are crucial; too fine an abrasive or too low pressure reduces effectiveness, while overly coarse grit or excessive pressure may damage delicate substrates. Conclusion: For targeted rust and solid contaminant removal in confined or hard-to-reach areas, the Sandblasting gun with 0.7 l. plastic tank, 390 series is an effective, appropriately specified tool when paired with the correct abrasive and operated within its pressure/temperature limits.

Pistola sabbiatrice con serbatoio in plastica da 0,7 l, serie 390

Pistole speciali per aria, Tutti i prodotti/

Additional information

Pistola per la rimozione di ruggine e contaminanti solidi in aree difficili da raggiungere tramite materiale abrasivo minerale. Diametro del grano 0,1 ÷ 0,8 mm a seconda del materiale da sabbiare. Versione con serbatoio in plastica da 0,7 l. Diametro ugello: 4 mm. Pressione massima: 8 bar. Pressione di esercizio: 4 ÷ 7 bar. Temperatura di esercizio: da 0°C a +50°C.

Elenco delle varianti di prodotto

Codice articolo	Nome variante prodotto	DN	BAR	Disponibilità	Prezzo	Quantità	Azioni	Catalogo
EW-39012	Pistola sabbiatrice, serbatoio 1 l, plastica, innesto DN7,2	-	8	In stock	0 zł		Richiesta

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Pistola per la rimozione di ruggine e contaminanti solidi in aree difficili da raggiungere tramite materiale abrasivo minerale. Diametro del grano 0,1 ÷ 0,8 mm a seconda del materiale da sabbiare. Versione con serbatoio in plastica da 0,7 l. Diametro ugello: 4 mm. Pressione massima: 8 bar. Pressione di esercizio: 4 ÷ 7 bar. Temperatura di esercizio: da 0°C a +50°C.