Is the Blanking nut, stainless steel, C7121L suitable for sealing a 1" unused port on a tee made of AISI 316?

Yes. The Blanking nut, stainless steel, C7121L is suitable for sealing a 1" unused port on a tee made of AISI 316 because the product description explicitly states it is intended for sealing one of the unused ports of a fitting (e.g., a tee) with an inch diameter and is made of AISI 316 stainless steel. Using a sealing component of the same material (AISI 316) ensures compatibility in corrosion resistance and thermal/mechanical properties, reducing risk of galvanic corrosion or differential wear. Ensure the nutâs thread type, size, and sealing surface match the teeâs port specifications and that any required gaskets or sealing compounds are compatible with AISI 316 and your process media.

Can the Blanking nut, stainless steel, C7121L reliably seal a 1" unused port on an AISI 316 tee?

Yes. The Blanking nut, stainless steel, C7121L is intended to seal one unused port of a fitting (e.g., a tee) with a 1" diameter and is made of AISI 316 stainless steel. When installed correctly in a matching 1" port on an AISI 316 tee, it will reliably provide a corrosion-resistant mechanical seal suitable for typical fluid and pressure applications for which this type of blind nut is specified. Ensure mating threads, surface finish, and torque meet manufacturer recommendations and verify pressure and temperature ratings for your specific system to guarantee leak-free performance.

Will the Blanking nut, stainless steel, C7121L fit and seal a 1" port on an AISI 316 tee?

Yes. the Blanking nut, stainless steel, C7121L is intended precisely for sealing an unused 1" port in a fitting such as an AISI 316 tee. The product description states itâs a blind nut designed to seal one of the unused ports with an inch diameter, and the material is AISI 316 stainless steel, matching the teeâs material. This ensures compatibility in size and corrosion resistance. Note: confirm port thread type and pitch (e.g., BSP, NPT, or other) to ensure a proper thread seal; if threads match, the C7121L will fit and seal the 1" port.

Dado cieco, acciaio inox, C7121L

Connettori di precisione LET-LOK, Tutti i prodotti/

Additional information

Dado cieco destinato alla chiusura di uno degli attacchi inutilizzati di un raccordo (ad esempio, una T) con diametro in pollici. Materiale: acciaio AISI 316.

Elenco delle varianti di prodotto

Codice articolo	Nome variante prodotto	DN	BAR	Disponibilità	Azioni
HM-LC7121L-01-SS	Tappo cieco raccordo 1/16", SS	-	-	In stock	Richiesta
HM-LC7121L-02-SS	Tappo di chiusura per raccordo 1/8", SS	-	-	In stock	Richiesta
HM-LC7121L-03-SS	Tappo cieco per raccordo 3/16", acciaio inox	-	-	In stock	Richiesta
HM-LC7121L-04-SS	Tappo cieco per raccordo 1/4", SS	-	-	In stock	Richiesta
HM-LC7121L-05-SS	Tappo cieco del raccordo 5/16", SS	-	-	In stock	Richiesta
HM-LC7121L-06-SS	Tappo cieco per raccordo 3/8", SS	-	-	In stock	Richiesta
HM-LC7121L-08-SS	Tappo cieco del raccordo 1/2", SS	-	-	In stock	Richiesta
HM-LC7121L-10-SS	Tappo per raccordo 5/8", acciaio inox	-	-	In stock	Richiesta
HM-LC7121L-12-SS	Tappo cieco per raccordo 3/4", SS	-	-	In stock	Richiesta
HM-LC7121L-16-SS	Tappo cieco per raccordo da 1", acciaio inox	-	-	In stock	Richiesta

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Dado cieco destinato alla chiusura di uno degli attacchi inutilizzati di un raccordo (ad esempio, una T) con diametro in pollici. Materiale: acciaio AISI 316.