Is the Round nozzle for coolant, 1/2" system, JETON compatible with 1/4" and 3/8" hoses or adapters?

Round nozzle for coolant, 1/2" system, JETON is specified as part of a 1/2" system and is available in sizes 1/4", 3/8", and 1/2". That means you can choose nozzle variants that match 1/4" or 3/8" hoses directly.use the nozzle produced in the corresponding size for a proper fit. Using adapters between these sizes is possible in principle, but you must ensure any adapter is compatible with acetal fittings, rated for the working pressure (up to 2 bar) and temperature (up to +65Â°C), and provides a secure, leak-free connection. For reliable performance, the best practice is to use the nozzle size that matches your hose or a manufacturer-recommended adapter.

Can the Round nozzle for coolant, 1/2" system, JETON withstand continuous operation at temperatures up to +65Â°C?

Yes. The Round nozzle for coolant, 1/2" system, JETON is specified with an operating temperature up to +65Â°C, so it is rated to withstand continuous operation at temperatures up to +65Â°C. Ensure system pressure does not exceed the working pressure limit of 2 bar and verify chemical compatibility with acetal for your coolant to maintain performance.

Can the Round nozzle for coolant, 1/2" system, JETON handle fluids other than coolant (e.g., cutting oil or water-based emulsions)?

Yes. the Round nozzle for coolant, 1/2" system, JETON can generally handle fluids other than coolant, such as cutting oil or waterâbased emulsions, but with important caveats: - Material compatibility: The nozzle is made of acetal (POM), which is chemically resistant to many oils and waterâbased fluids. It is typically compatible with mineral cutting oils and common waterâbased emulsions, but aggressive solvents, strong acids/alkalis, or certain specialty additives can cause swelling or degradation. Verify the fluidâs chemical data sheet against acetal compatibility. - Pressure and temperature limits: The nozzleâs working pressure is up to 2 bar and operating temperature up to +65Â°C. Ensure your alternative fluidâs system pressure and operating temperature stay within these limits; higher pressures or temperatures may cause malfunction or reduced lifespan. - Viscosity and flow: Thicker fluids (heavy cutting oils) may reduce flow or spray quality through the nozzle. Waterâbased emulsions usually spray well, but verify spray pattern and droplet size in application. you may need different nozzle size or higher pressure for satisfactory coverage. - Maintenance and contamination: Using oils can lead to buildup, clogging, or fouling over time; waterâbased emulsions can promote microbial growth if not maintained. Implement regular cleaning and inspection to ensure consistent performance. Recommendation: Check the specific fluidâs chemical compatibility with acetal, confirm system pressure and temperature are within the nozzleâs limits, and test the Round nozzle for coolant, 1/2" system, JETON in your actual operating conditions before full deployment.

Ugello tondo per refrigerante, sistema 1/2″, JETON

Tubi per aria e acqua, Tutti i prodotti/

Additional information

Ugello tondo per tubi refrigerante JETON – sistema 1/2″. Disponibile nelle misure 1/4″, 3/8″ e 1/2″. Materiale: acetalica. Pressione di esercizio: fino a 2 bar. Temperatura di esercizio: fino a +65°C.

Elenco delle varianti di prodotto

Codice articolo	Nome variante prodotto	DN	BAR	Disponibilità	Azioni
JT-84042	Ugello rotondo 3/8" (sistema 1/2")	-	2	In stock	Richiesta
JT-84043	Ugello rotondo 1/2" (sistema 1/2")	-	2	In stock	Richiesta
JT-84044	Ugello rotondo 1/4" (sistema 1/2")	-	2	In stock	Richiesta

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Ugello tondo per tubi refrigerante JETON – sistema 1/2″. Disponibile nelle misure 1/4″, 3/8″ e 1/2″. Materiale: acetalica. Pressione di esercizio: fino a 2 bar. Temperatura di esercizio: fino a +65°C.