Is the Adaptor - elbow 90Â° with GW BSP, carbon steel, type A115A suitable for use with hydraulic systems operating at high pressures and does its internal BSP flat sealing ensure leak-free connections?

Adaptor - elbow 90Â° with GW BSP, carbon steel, type A115A Format is designed as a 90Â° high-pressure adapter with internal BSP thread and flat sealing, made of galvanized carbon steel. Its construction from carbon steel and galvanization gives it good mechanical strength and corrosion resistance suitable for many hydraulic applications. The internal BSP flat sealing (G-thread) provides a metal-to-metal or flat-face seal that, when assembled correctly with the appropriate mating part and under recommended torque, can achieve reliable, low-leakage connections for high-pressure systems. However, suitability for a specific high-pressure hydraulic system depends on the exact pressure rating, fluid type, temperature, dynamic loads and compatibility with system fittings. The product description does not specify maximum working pressure, sealing surface finish, or certification standards. Before use in critical high-pressure applications, verify the adapterâs rated working pressure, material compatibility with the hydraulic fluid, and compliance with applicable standards; ensure correct installation (clean threads, proper torque, and mating flat-face counterpart) and consider pressure testing or manufacturer documentation to confirm leak-free performance.

Can the Adaptor - elbow 90Â° with GW BSP, carbon steel, type A115A be used with corrosive fluids given its galvanized finish?

Adaptor - elbow 90Â° with GW BSP, carbon steel, type A115A has a galvanized finish which offers some corrosion resistance, but it is not suitable for prolonged contact with strongly corrosive fluids or highly aggressive environments. Galvanizing protects against atmospheric corrosion and mild chemical exposure, but it can degrade when exposed to acids, alkalis, chlorides, or other aggressive media. For corrosive fluids, select materials specifically resistant to the fluid (e.g., stainless steel, duplex, or appropriate coatings/linings) and verify chemical compatibility and pressure/temperature limits. If unsure, consult the manufacturer or a corrosion specialist before use.

Does the Adaptor - elbow 90Â° with GW BSP, carbon steel, type A115A require specific torque values for its internal BSP flat sealing?

Adaptor - elbow 90Â° with GW BSP, carbon steel, type A115A does not require specific torque values for its internal BSP flat sealing in the same way as thread-and-seat or metal-to-metal tapered connections. BSP flat sealing (also called BSPP or parallel thread with flat face) achieves leak-tightness by compressing a flat gasket or the mating flat surfaces rather than relying on thread deformation. Key practical guidance: - Use a competent wrench and tighten until the flat sealing face is fully engaged and a positive compressive load on the sealing surface or gasket is achieved. - Avoid excessive torque: over-tightening can damage the flat sealing face, crush gaskets, strip threads, or induce distortion in the adapter. - If a gasket or O-ring is used, follow the gasket manufacturerâs recommended compressive load or installation instructions. - If tightening into a port or mating fitting with a specified torque (by the equipment maker), follow that equipment specification. - For repeatability and safety in critical/high-pressure systems, use a torque wrench and establish an installation procedure by testing assemblies at working pressure to confirm leak-free performance. - Ensure threads are clean, undamaged, and properly lubricated if recommended for the sealing system in use. In summary, there is no universal numeric torque value provided for Adaptor - elbow 90Â° with GW BSP, carbon steel, type A115Aâs internal BSP flat sealing; tighten to achieve full face contact without over-torquing, or follow gasket/equipment-specific torque recommendations where applicable.

Adattatore – gomito 90° con GW BSP, acciaio al carbonio, tipo A115A

Adattatori ad alta pressione, Tutti i prodotti/

Additional information

Materiale	CS – acciaio (ghisa)

Adattatore alta pressione 90° tipo A115A con filetto interno BSP (tenuta piatta). Materiale: acciaio al carbonio, zincato.

Elenco delle varianti di prodotto

Codice articolo	Nome variante prodotto	DN	BAR	Disponibilità	Azioni
TI-A115A-02	Adattatore 90Â° GW BSP 1/8" / GW BSP 1/8"	-	350	In stock	Richiesta
TI-A115A-04	Adattatore 90Â° GW BSP 1/4" / GW BSP 1/4"	-	350	In stock	Richiesta
TI-A115A-06	Adattatore 90Â° G BSP 3/8" / G BSP 3/8"	-	250	In stock	Richiesta
TI-A115A-08	Adattatore 90Â° GW BSP 1/2" / GW BSP 1/2"	-	225	In stock	Richiesta
TI-A115A-12	Adattatore 90Â° filetto femmina BSP 3/4" / filetto femmina BSP 3/4"	-	200	In stock	Richiesta
TI-A115A-16	Adattatore 90Â° GW BSP 1" / GW BSP 1"	-	160	In stock	Richiesta
TI-A115A-20	Adattatore 90Â° GW BSP 1.1/4" / GW BSP 1.1/4"	-	160	In stock	Richiesta
TI-A115A-24	Adattatore 90Â° FEMM. BSP 1.1/2" / FEMM. BSP 1.1/2"	-	160	In stock	Richiesta
TI-A115A-32	Adattatore 90Â° GW BSP 2" / GW BSP 2"	-	125	In stock	Richiesta

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Adattatore alta pressione 90° tipo A115A con filetto interno BSP (tenuta piatta). Materiale: acciaio al carbonio, zincato.

Additional information

Materiale	CS – acciaio (ghisa)

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

Rete di vendita
Verifica

Richiesta
Invia

Prodotti correlati

Potrtai nelbuje per un'offerta disponibile per questo prodotto opure non elineato?

Chiamaci: +39 348 811 3340 o scrivici: m.ceriani@tubes-international.com

INVIA RICHIESTA

TUBI E RACCORDI PER L'INDUSTRIA

Adattatore – gomito 90° con GW BSP, acciaio al carbonio, tipo A115A

Additional information

Elenco delle varianti di prodotto

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Additional information

Hai bisogno di una quantità maggiore di prodotti o di un'offerta personalizzata?

Prodotti correlati

Adattatore con GZ BSP/flangia SAE 3000, acciaio al carbonio, tipo A118

Adattatore 90° con GZ BSP/flangia SAE 6000, acciaio al carbonio, tipo A121

Adattatore – nipplo GZ BSP, acciaio al carbonio, tipo A101

Potrtai nelbuje per un'offerta disponibile per questo prodotto opure non elineato?

Prodotti

Servizi

Contatti

Social Media

Trova il tubo o raccordo perfetto per il tuo impianto

Trova il tubo o raccordo perfetto per il tuo impianto

oppure clicca per vedere tutti i nostri prodotti

Scopri anche i prodotti più richiesti, già testati sul campo